Bidets are plumbing fixtures that are becoming increasingly popular in Canada as people are realizing the many benefits of using them. Bidets can help to improve personal hygiene, reduce the need for toilet paper, and even save money on your water bill. If you’re considering installing a bidet in your home, this guide will walk you through the process step by step.
Before you continue, it is important to mention that for high-quality bidet installation it is better to ask for professional residential plumbers help.
Table of Contents
What is a toilet bidet?
A bidet (pronounced “bee-DAY”) is a plumbing fixture installed next to the toilet. It is used to spray water on your bottom area after you use the toilet. Bidets can be either manual or electronic. Manual bidets have a simple hand-held sprayer, while electronic bidets have various features, such as heated water, adjustable spray patterns, and even a dryer.
Benefits of using a bidet
Bidets offer several advantages over traditional toilet paper, including:
Improved hygiene: Bidets use water to clean your bottom area, which removes bacteria and fecal matter more effectively than toilet paper alone. This can help to reduce the risk of urinary tract infections (UTIs), hemorrhoids, and other health problems.
Reduced need for toilet paper: With a bidet you can significantly reduce the amount of toilet paper you need to use. This can save you money on your toilet paper bill and help to reduce environmental waste.
Comfort: Bidets may provide a more comfortable alternative to toilet paper, particularly for individuals with sensitive skin or hemorrhoids. The warm water spray can be soothing and relieving and help reduce itching and irritation.
Environmentally friendly: Bidets offer a more environmentally friendly choice as they consume less water compared to traditional toilet paper. This is because bidets use a targeted water spray, while toilet paper requires a lot of water to manufacture and transport.
Easier to use for people with disabilities: Bidets can be easier for people with disabilities, such as those with arthritis or limited mobility. The hands-free operation of a bidet can make it easier to clean yourself up after using the toilet.
Improved overall health: Bidets can help to improve overall health by promoting better hygiene, reducing the need for toilet paper, and providing comfort for people with sensitive skin or hemorrhoids. Additionally, bidets can be easier to use for people with disabilities, which can help them to maintain their independence.
Types of bidets
Several types of bidets are available, each with its pros and cons. Here is a breakdown of the most common types:
1. Standalone Bidets
Standalone bidets are the most traditional type of bidet. They are separate fixtures that are installed next to the toilet. Standalone bidets typically have a basin, a spray nozzle, and a control panel. Some bidet models also have additional features like heated water, adjustable spray patterns, and a dryer.
Pros:
- Offer the most features and flexibility
- It can be installed with or without a toilet
- Comfortable and luxurious
Cons:
- Most expensive option
- Require more space in the bathroom
- Installation can be more complex
2. Bidet Seats
Bidet seats can be affixed to your current toilet bowl, serving as a replacement for the standard toilet seat.
Bidet seats have various features, such as heated water, adjustable spray patterns, and a dryer. Some models also have a built-in deodorizer.
Pros:
- Easier to install than standalone bidets
- More affordable than standalone bidets
- It can be a good option for bathrooms with limited space
Cons:
- Not as many features as standalone bidets
- It can be difficult to install on some toilets
- It may not be as comfortable as standalone bidets
3. Bidet Attachments
Bidet attachments are the most affordable and easiest-to-install type of bidet. They attach to the toilet’s water supply line and have a hand-held sprayer. Bidet attachments typically have a few basic features, such as cold water spray and a choice of spray patterns.
Pros:
- Most affordable option
- Easiest to install
- It can be a good option for renters or people with limited budgets
Cons:
- Fewest features
- Not as comfortable as standalone bidets or bidet seats
- It can be messy to use
4. Portable Bidets
Portable bidets are small, hand-held devices that can be filled with water and used on the go. Portable bidets are an excellent option for travellers or people who want a bidet they can take anywhere.
Pros:
- Portable and convenient
- Easy to use
- Affordable
Cons:
- Small water capacity
- Not as comfortable as other types of bidets
- It can be messy to use
5. Hand-held Bidet Sprayers
Hand-held bidet sprayers are similar to portable bidets but are permanently installed next to the toilet. Hand-held bidet sprayers have a hose that connects to the toilet’s water supply line and a spray nozzle.
Pros:
- Affordable
- Easy to install
- More comfortable than portable bidets
Cons:
- Fewer features than other types of bidets
- It can be messy to use
Choosing the Right Bidet
The best type of bidet for you will depend on your needs and preferences. Consider your budget, the amount of space you have in your bathroom, and the features that are important to you. If you are still determining which type of bidet is right for you, talk to a plumber or bathroom designer.
How to install a bidet
Tools Needed for Installing a Bidet
The tools you’ll need to install a bidet will vary depending on the specific type you’re installing.
However, some essential tools that are commonly needed include:
- Adjustable wrench: This will be required to tighten and loosen various nuts and bolts during installation.
- Screwdriver: This will be needed to tighten and loosen screws during the installation process.
- Teflon tape: This tape will be used to seal the connections between pipes and fittings to prevent leaks.
- Plumber’s putty: You will use this to seal the gap between the bidet and the toilet tank to prevent leaks.
- Bucket or towel: This will be used to catch any water that spills during the installation process.
- Gloves: Use gloves to protect your hands from dirt and grime during toilet bidet installation.
- Safety glasses: Use safety glasses or goggles to protect your eyes from debris during bidet installation.
In addition to these essential tools, you may need some specialized tools depending on the bidet you’re installing. For example, if you’re installing a bidet seat, you may need a bidet seat mounting kit. And if you’re installing a hand-held bidet sprayer, you may need a hose and spray nozzle.
Once you have all of the tools you need, you’re ready to begin the installation process.
Bidet Installation Process
Installing a bidet can be a DIY project, but following the instructions carefully is important to avoid leaks and other problems. Here’s a general overview of the steps involved:
Step 1: Turn off the water supply to your toilet.
Locate the shut-off valve for your toilet’s water supply line. It’s usually located near the bottom of the tank or on the wall behind the toilet. Rotate the shut-off valve in a clockwise direction until it reaches its limit to completely shut off the water.
Step 2: Flush the toilet to empty the tank
Flush the toilet and eliminate any remaining water from the tank. This step facilitates work on the tank and helps prevent water spillage.
Step 3: Remove the existing toilet seat and tank lid.
Unscrew the bolts that hold the toilet seat and tank lid in place. Carefully lift the seat and lid off of the toilet bowl.
Step 4: Install the T-valve.
Connect the T-valve to the cold water supply line emerging from the wall. Ensure a secure seal on the threads of both the T-valve and the water supply line by using Teflon tape.
Step 5: Attach the bidet to the T-valve.
Link the bidet’s water supply hose to the T-valve, applying Teflon tape to seal the threads on both the hose and the T-valve.
Step 6: Mount the bidet to the toilet bowl.
Place the bidet on the toilet bowl, ensuring the mounting holes align with those in the toilet base. Insert the bolts through the corresponding holes and secure them using the wrench.
Step 7: Connect the bidet to the water supply.
Attach the bidet’s spray hose to the T-valve, employing Teflon tape to seal the threads on both the hose and the T-valve.
Step 8: Turn on the water supply and check for leaks
Slowly open the shut-off valve to turn on the water supply to the toilet. Check for leaks around the T-valve, bidet connections, and spray hose. If you find leaks, tighten the connections or apply Teflon tape.
Step 9: Install the toilet seat and tank lid.
Place the toilet seat and tank lid back onto the toilet bowl. Align the holes in the seat and lid with the bolts on the toilet base. Screw in the bolts and tighten them with the wrench.
Step 10: Test the bidet.
Turn on the bidet and test the spray. Adjust the spray pattern and water pressure to your liking.
No comment yet, add your voice below!