How to unclog drains safely – Clear clogged sinks, toilets, and tubs

Drains will inevitably become clogged as they handle water, hair, grease, and other solid substances. However, there is no need to hire a residential plumber for minor blockages in sinks, tubs, showers, and toilets. Various inexpensive and efficient techniques can help you unclog drains quickly and easily, allowing you to resume normal activities in no time.

However, it is essential to remember that even if you can’t unclog drains efficiently after learning the methods below, contact a plumbing company and ask for residential plumbing services.

Safest Methods for Clearing Up Clogged Drains

Numerous products in the market can dissolve the most stubborn substances clogging drains. However, such products usually contain harsh chemicals that are detrimental to your health and plumbing. Therefore, why opt for them when safer alternatives that are equally effective are accessible?

Here are some of the most effective methods to unclog drains without resorting to chemicals.

safest methods for unclogging drains

Use Dish Soap

If you find that grease has congealed in your pipes and is clogging your sink drain, causing a variety of issues, don’t fret. A readily available solution that can be found right next to your sink is dish soap. Here is how you can do it:

1. Boil water in a kettle.

2. Remove standing water from the sink and drain.

3. Pour a substantial quantity of dish soap into the clogged drain.

4. Allow the soap to drip for a few minutes to reach the blocked area.

5. Pour hot water from the kettle down the drain to flush it out.

6. Repeat the process if necessary. If the clog persists, it may be due to something other than grease.

Use Dish Soap to Unclog Drains

You Can Use a Plunger to Unclog Drains

Bathroom sinks are notorious for getting clogged with hair and soap scum. Luckily, you can use a plunger to clear your bathroom sink just like you would your toilet. However, make sure to clean the plunger thoroughly or use a separate one. Here are the steps:

1. First, remove any cover or plug from your drain.

2. Run the faucet until there’s about an inch of water in the sink.

3. Ensure a tight seal by placing the plunger completely over the drain.

4. Vigorously pump the plunger up and down for up to thirty seconds.

5. Observe how the water drains. If it remains in the sink, pump the plunger again.

Use a Plunger to Unclog Drains

Using Baking Soda is One of the Safest Ways of Unclogging Your Drain

Baking soda is a safe and natural drain cleaner that can effectively unclog drains. Combine baking soda with vinegar and boiling water to create a powerful, chemical-free unclogging solution. All you need to do is to follow these steps:

1. Boil water in a kettle.

2. To unclog and warm up the pipes, pour the boiling water into the blocked drain.

3. Refill the kettle with water and heat it up.

4. Pour a cup of baking soda and a mixture of one cup of water and vinegar down your blocked drain.

5. Cover the drain and leave it for ten minutes.

6. Pour boiling water down the drain.

7. The vinegar and baking soda mixture should loosen the clog enough for the boiling water to flush it out.

using baking soda for unclogging a drain

Use Wire Hanger

If you have a wire hanger lying around, you can use it to break up drain clogs. Here’s how:

1. Use needle-nosed pliers to straighten the hanger into a long wire while keeping the hook intact on one end.

2. Insert the hook end into the drain and rotate it while keeping a firm grip on the other end.

3. If you encounter resistance, wiggle and rotate the hanger a few more times.

4. Gently remove the hanger from the drain and wipe away any debris with a paper towel.

5. Repeat until the clog is completely cleared.

6. Be careful when using this method. Too much force can push the clog deeper into the pipe and make the problem worse.

Use Wire Hanger to clear drains

The Most Professional Method is Using Drain Snakes

If a wire hanger is ineffective, you may need to purchase a drain snake specifically designed to unclog drains. Here are the steps to follow:

1. Place the tip of the drain snake into the drain.

2. Rotate the handle at the end of the drain snake to push the tip further into the drain.

3. Continue rotating the snake into the drain until you encounter resistance.

4. Rotate the snake and continue cranking until it breaks through the clog.

5. When you break through the clog, crank the drain snake in the opposite direction to remove it from the drain.

6. Allow hot water to run through your bathroom or sink drain for a few minutes to clear the blockage.

drain snakes

Now Let’s Learn How to Unclog Any Clogged Drain 

How to fix a clogged toilet:

Forcing a clog through a toilet with a plunger can sometimes worsen the problem. Instead, form a seal and apply gentle pressure on the plunger as you push it down, then pull it back sharply. This will help you pull the clog back up towards the bowl, breaking the blockage and allowing gravity to take over.

If the clog is stubborn, a plunger may not work. In this case, a toilet auger can be used. It is designed to fit inside the toilet bowl and enables the user to thread a cable through the toilet without causing any scratches to the surface coating. The auger can break up the clog, hook it, and pull it back through the bowl.

How to fix a clogged lavatory sink:

While plungers can be useful for clearing sink clogs, it is crucial to employ the appropriate method.

Nearly all lavatory sinks that comply with the code have overflows located approximately one inch from the rim. When plunging, the pressure can potentially travel back through the overflow instead of dislodging the blockage. To avoid this, cover the overflow hole with a rag and apply hand pressure while plunging to take advantage of the hydraulic pressure.

If the plunger proves ineffective, resort to using a wire drain snake. Eliminate the pop-up assembly from the sink and insert the wire gently into the drain while rotating the handle. As soon as the snake progresses, add some extra wire and keep feeding it through. This will break up the blockage and force it through the pipe.

The sink drains often converge at a T or Y-shaped connection in bathrooms featuring two sinks. In sinks with T-shaped fittings, if a snake is inserted through one sink drain, it may potentially travel across the pipes and into the other sink rather than traveling down the drain towards the blockage. In such situations, you might need to eliminate the T-fitting, snake the drain, and subsequently substitute the T-fitting with a Y-shaped fitting.

How to fix a clogged bathtub:

When using a plunger on a shower drain, cover the overflow to create a seal. The most straightforward method is to take off the cover, place a cloth over the opening, and apply pressure with your hand. This enables the plunger to generate pressure in the drain system, hoping to push the blockage through.

If plunging does not eliminate the blockage, proceed to feed the snake through the overflow opening and down into the drain system.

The overflow creates a direct route to the trap, circumventing the narrow turn produced by the drain’s T-shape.

How to unclog a clogged drain pipe:

Bathroom fixtures such as sinks, toilets, and showers are connected to bigger drain pipes, which can also become clogged. However, regulations require the installation of a cleanout fitting at every change of direction. Simply remove the cap and employ this access point to clear the obstruction by using a pair of pliers or a wrench,

Using a larger wire snake is one method to unclog drains pipes. These snakes are typically longer and more powerful, with more aggressive tips designed to break up or hook onto the clog for removal.

To clear the clog, insert the wire snake into the drain and continue feeding it until the obstruction is removed. Whenever feasible, run water through the pipes while snaking to flush the loosened build-up through the system.

Drain-cleaning bladders can also be used to clean clogs using hydraulic force. Rubberized bladders can be attached to the end of a hose and placed inside a cleanout. As water fills the bladder, it expands, creating a seal to block the pipe.

The bladder has a hole at the tip that releases water into the drain pipe, increasing the pressure and forcing the clog to move forward and out of the system. However, note that this system can potentially damage older pipes.

Do Not Go for Chemicals

Chemical drain cleaners are only appropriate for infrequent use in running slow drains, as they cannot clear actual blockages. Furthermore, utilizing liquid drain cleaner in a drain can make the task more hazardous for anyone required to remove the blockage using a plunger or snake. In addition, chemical drain cleaners are harmful to the environment and can corrode metal pipes, resulting in drains that are too effective and cause flooding.

Why professional cottage plumbing services Is Essential to Ensure Safe Drinking Water

If you own a lovely country retreat in the countryside, the last thing you want to discover when on vacation with your family or friends is that your water quality has worsened during the winter and will require professional cottage plumbing services.

Worse, you may discover that it is no longer safe to consume after getting ill. However, water quality problems can develop at any time and drinking water that is clean and hygienic is crucial for remaining fit and healthy. So, this article is intended to assist you to understand the importance of water quality and the need to hire professional cottage plumbing services.

Without a source of clean water, you run the danger of dehydration, which can lead to long-term problems and jeopardize your health. Many factors contribute to water getting unsafe to drink, which almost always requires you to hire professional cottage plumbing services to maintain healthily. Some of the reasons water can get unsafe to drink can be:

  • Exposure to metal pollution
  • Microbial pollutants
  • Septic systems that have not been checked by professional cottage plumbing services
  • Sewage leakage
  • And Unfiltered residential plumbing systems

cottage plumbers

What Are the Benefits of Clean Water Consumption?

The consumption of clean water is vital to the health of any living being, not only humans. Drinking unsafe water can result in an array of ailments more serious diseases and even fatal circumstances, and you will almost always need the assistance of professional cottage plumbing services to ensure that your water is safe and free of any unhealthy pollutants.

Therefore, in situations in that you may have not been able to check the water quality for months like a cottage, having professional cottage plumbing services take a look at the water quality can be a lifesaver.

Clean water provided by professional cottage plumbing services is required not just for drinking but also for sanitation. If clothing or even the body is washed with polluted water, disease transmission will increase. Cooking, cleaning, and other such duties that are a part of our daily life are also similarly affected.

A Lack of Professional Cottage Plumbing Services Can Lead to Serious Diseases

Cholera, typhoid, e-coli, and hepatitis are some of the fatal medical disorders caused by the ingestion or use of polluted water. Clean water is crucial not just for illness prevention but also for overall health. Consider the dangers that you, your friends and your family may face when you’re in the presence of unsafe water and you’ll almost immediately realize the best course of action in such cases is to contact your local professional cottage plumbing services.

How Can Water Be Polluted and What to Look Out For?

As we’ve already mentioned, there’s a plethora of things that can make water unsafe for consumption, but how should we recognize these risks and what are the factors to consider before the matter becomes too serious that you’ll need professional cottage plumbing services? For example, the local drinking water supply in certain areas has a high hard water content, which implies it contains a high amount of minerals.

This can be harmful because if the mineral concentration is too high, plumbing and water supplies might get clogged and unhygienic conditions can develop. Pipelines can also deteriorate as a result of minerals.

professional cottage plumbing services can help in the occurrence of full block and help to unclog bathroom sinks or even completely replace some of the pipes to ensure safe water is being used in your home.

The Necessity of Professional Cottage Plumbing Services for Remote Homes

The water of remote homes will almost always be provided with either well water, lake water, or holding tank water. If the water comes from a holding tank, you should have it cleaned and replenished by professional cottage plumbing services every year when you return in the spring.

professional cottage plumbing services can install this treatment at the “point of entry” to the cottage, where the main water lines enter the structure, and it will treat all water carried into your home. Another option that professional cottage plumbing services can apply is a “point of use” system, in which treatment units are put at individual drinking water fixtures, such as the kitchen sink.

This would entail having the water tested by professional cottage plumbing services annually when you return from the winter, as well as installing a filter/treatment system. This will provide you and your family with safe, clean drinking water if your water comes from a well or a lake.

How Do Professional Cottage Plumbing Services Help Solve This Issue?

Professional plumbers can assist you and your family by providing a comprehensive range of professional cottage plumbing services that can help prevent and resolve all of your plumbing issues. The expertise of professional cottage plumbing services can ensure the safety of your and your family’s health by employing health-related strategies and approaches.

And of course, it’s not only about the quality of the drinking water. After all the risks and hazards that unsanitary water can have, you’ll undoubtedly want to the professional cottage plumbing services to make sure your restrooms are in fine working order as well. After all, plumbing systems are often interconnected, so you should ensure that everything is in good working order.

What Causes Plumbing Leaks?

When plumbing leaks occur, trouble is sure to follow. However, why do pipelines leak in the first place? Oxidation, cracking, and broken pipes only lead to significant water damage. The issue is a majority of your home’s pipes are hidden from view.

So, how can you tell if you have plumbing leaks before you have a major mold problem? There are several typical reasons for plumbing leaks, but you wouldn’t know what to check for if you didn’t know what to look out for.

We have your back. There are different types of plumbing leaks. The most common causes of pipe leaks are listed below. Your plumber is usually the best person to start with if you want to find out what causes pipes to leak.

fixing plumbing leaks

Plumbing Leaks Caused by Broken Water Seals

There are seals around the water connections on every home device linked to the plumbing system. It prevents you from having your indoor pool and keeps the flow of water where you want it.

You may have a damaged water seal if you see a lot of “condensation” (or just literal pools of water) surrounding your dishwasher or refrigerator. This might be why plumbing leaks have happened in your house in this scenario.

High Water Pressure Leading to Pipe Leaks

You want lots of water pressure in your shower, but your pipes can only take so much. A home’s typical pipes can withstand maximum water pressure of 60 psi. Your psi should be between 40-45 psi.

Having high water pressure in the shower might be great, but not at the cost of causing plumbing leaks.

Plumbing Leaks Caused by Pipe Corrosion

Water pipes rust. It’s unavoidable. We tend to disregard “little” problems in our boiler room plumbing, but those “minor” problems quickly become major ones. If you detect any discoloration, leakage, or warping in your copper pipes, it’s time to call a plumber.

Before the minor cause that makes the pipes leak makes everything worse, have a plumber analyze the issue as soon as possible. The water quality is impacted by rusting pipes, which eventually affects your health.

There are methods on how you can avoid home plumbing pipe corrosion.

Plumbing Leaks and Broken Pipe Joints

Pipe joints are necessary to connect pipes from one end of your residential plumbing system to the other. Pipe joints are the most susceptible components of your piping systems. Like your copper pipes, your joints will rust and corrode over time.

It occurs considerably faster since the joints have a significantly smaller surface area. When investigating what causes plumbing leaks, it’s usually a good idea to examine your pipe joints. The only issue is that most of the pipe connections in your home’s plumbing systems are hidden.

Using your ears is the easiest method to check for damaged pipe joints causing plumbing leaks. You may hear a lot of clinking and clanging when you turn on the hot water. This might be due to faulty pipe fittings.

Clogged Water Lines Cause Plumbing Leaks

Clogged drains are annoying and can cause disaster, especially in commercial plumbing systems. Still, they are easily remedied using drain cleaning. Clogged or blocked water lines are responsible for plumbing leaks, water damage, and damaged pipes.

Water constantly backs up when your water pipes are clogged. This significantly increases the water pressure in your plumbing system, which can easily lead to leaks.

Sneaky Tree Roots Can Cause Plumbing Leaks

Other threats to your pipes lie outside of your home. Growing root systems in your yard can strain your pipes, especially in compacted soils. Excessive pressure may easily cause pipes to break and leak.

If you find unusual pools of water on your lawn, you may be dealing with a busted pipe or some plumbing leaks.

Rapid Temperature Change

This is especially problematic during the winter. Rapid temperature variations in the water (or outside temperature) cause your pipes to expand and shrink. This will cause your pipes to break over time as the walls of the pipes become thinner and thinner.

This happens naturally when your pipes age, but significant temperature swings can worsen it. In most plumbing systems, protective layers are put on pipes, especially in industrial plumbing systems, which can help delay this type of damage to the pipes.

Knowing the Causes, the Signs, and the Solution for the plumbing leaks

So you now understand what causes plumbing leaks and the fundamental symptoms. One of the options is trying to do your plumbing repairs by yourself.

Since there are different types of plumbing leaks, there is no need to take any risks. When you need your pipes fixed or changed, always call a professional. Still, it’s a good idea to learn about quick plumbing fixes everyone should know.

4 Quick PLUMBING FIXES Everyone Should KNOW

There isn’t always enough time to wait for a plumber in times of emergency, like a burst pipe, or we sometimes need quick plumbing fixes that don’t require a professional plumber with industrial plumbing knowledge.

There are many DIY plumbing repairs and quick plumbing fixes, from leaky appliances to more serious matters such as a faulty water heater. You can either fix the issue yourself or prevent further damage from being done until a plumber arrives on site. Some of these common plumbing issues consist of:

  • Running toilet
  • Sewer system backup
  • Clogged drains, most commonly in residential plumbing leaky pipes and their quick plumbing fixes
  • Low water pressure

WATER HEATER FAILURE

If your water heater isn’t working properly, one of the best quick plumbing fixes is to shut it off first. If your water heater isn’t operating correctly, sediment has most likely accumulated in the tank. When sediment collects at the bottom of a water heater tank, it obstructs the heating element.

The water heater loses time and energy by attempting to heat through the sediments. You don’t receive as much hot water quickly, and your water heater strains. You must replace all water heaters at some point; however, draining your tank is one of the quick plumbing fixes that may dramatically increase its lifespan.

At this point, you may then either hire an expert to fix it or try quick plumbing fixes to troubleshoot the problem yourself. If you’re comfortable doing so yourself, make sure first to inspect the pressure relief valve to ensure it’s in good working order.

best plumbing fixes - O Plus Plumbing Inc. | Leading Plumbing, Plumber & Drain Company in The Greater Toronto Area - Professional Plumbing & Drain In Toronto and GTA

HOW TO FLUSH YOUR WATER HEATER

If you suspect sediment buildup is the issue with your water heater, as is with most boiler room plumbing appliances, the best choice of DIY plumbing repair and quick plumbing fixes is to flush the tank. Firstly, turn off the tank and run hot water inside your house until the tank has been emptied.

Now that we have an empty water heater tank, like other quick plumbing fixes, we need to start cleaning. Turn off the water supply to the water heater, connect a garden hose to the drain valve, and put the other end to a floor drain to empty the wastewater. Then, reopen the water source without letting the hose disconnect and allow the water to flow, and rinse the inside of the tank until it clears.

After reaching the point of constant clear water, close the source again and let the tank completely drain. Restart the water heater normally and determine whether the problem has been resolved, whether you need to use more quick plumbing fixes, or even contact the professionals.

LEAKING PIPES AND THEIR MANY QUICK PLUMBING FIXES

One of the most prevalent plumbing problems is leaking pipes, but it also has easy and quick plumbing fixes that you can do yourself before hiring a professional to replace the pipe, preventing tragedies. You don’t want water leaking into your home, no matter how little the pipe leak is. Even little leaks might grow into significant issues.

But before doing anything regarding quick plumbing fixes for leaky pipes, you need to start by shutting off the water and measuring the circumference of the leaking pipe.

CLOSE THE CONNECTING VALVE

Quick plumbing fixes are simple, especially with these common plumbing issues, so let’s get started. Locate the nearest shut-off valve to cut the water supply to a leaky pipe. For showers, toilets, and sinks, the water supply will be connected to a little knob under them, and access panels on the other side of the wall are standard in showers and tubs. Just turn the shut-off valve counterclockwise to suspend the flow of water.

But if the leak is not near a convenient shut-off valve, don’t worry, as there are more quick plumbing fixes available. In this case, you may need to cut off the water to your whole house until the leak is repaired. Find your water main near where the city water supply enters your property. It will include a knob or lever-style valve that allows you to turn off the water supply to your property.

BROKEN PORCELAIN

Like everything else, toilets, bathtubs, sinks, and showers may crack or shatter. This equipment, on the other hand, is occasionally filled with water. If the bottom of your toilet busts open and floods your bathroom, it’s tempting to panic, but there’s no need to, as there are quick plumbing fixes. In situations like these, you’ll want to stop the leak from causing damage to the floor as soon as feasible.

Having plumber’s putty in your quick plumbing fixes toolkit is essential. Apply the plumber’s putty to the interior of the leak first. Squeeze it in as tightly as possible. Plumber’s putty is inherently water resistant, so it should last long.

Apply caulk directly over the putty after you’ve compressed it as much as possible. The caulk will assist build a secondary seal and stay longer than the plumber’s putty, but it won’t be easy to apply without it. However, these are quick plumbing fixes, and neither the caulk nor the putty will stay on forever, so consider replacing your toilet, sink, or tub shortly after.

LEAKY PIPE JOINTS

The last of our quick plumbing fixes describes the leaky joint. Leaking pipe connections are more difficult to detect than regular pipe leaks. Because of the angle of the joint, rapid repairs might be uncomfortable or useless.

Fortunately, there are a few tools mainly intended for quick plumbing fixes for irritated leaks like these. Rubber pipe connectors and repair sleeves are flexible enough to wrap around a leaky joint and press down on it to force water back through the pipe.

To utilize a rubber pipe connection or repair sleeve for quick plumbing fixes, follow these steps: Measuring is essential. You should cut rubber pipe connections to fit snuggly around the leak. If the connector is wrapped securely enough, the rubber will withstand water, but it will not last forever. Repair sleeves help repair minor joint leakage. To keep your rubber wrap in place, lay a clamp over it.

What are 5 Different Types of Home Plumbing Pipes?

Residential plumbing systems have come a long way from the clay piping used in ancient Greece to supply water for homes and carry sewage and wastewater away. Plumbing supply manufacturers produce pipes from various materials that can provide hot and cold water to every plumbing fixture in your house. Residential plumbing pipes also create a vital drain and vent system for your house. Although there are different types of home plumbing pipes, five of them are used more in homes, which are:

  • PEX Home Plumbing Pipes
  • PVC Residential Plumbing Pipes
  • ABS Pipes
  • Copper Plumbing Pipes
  • Galvanized Pipes for Home Plumbing

Although all types of home plumbing pipes are practical in specific applications, not every piping is suitable for all situations. Additionally, some of the lines are not up to code. Modern building codes set forth measures your system must adhere to to ensure public safety and protect your home from damage. Now let’s get to the details about these home plumbing pipe types.

PEX Home Plumbing Pipes

PEX or cross-linked polyethylene home plumbing pipes are affordable plastic tubing famous for residential water supply lines since they do not leach traces of corrosion or rust into the water like some other old types of pipes.

Installing cross-linked polyethylene residential plumbing pipes is considerably easy and also, since they are a flexible material, working with PEX tubes is much easier.

One of the best things about these home plumbing pipes is that you can use several connection methods, which allows you to work with different plumbing tools.

PEX home pipes come in three primary colors: blue for cold water, red for hot water, and white for cold or hot water.

PVC Residential Plumbing Pipes

PVC or home plumbing pipes made from polyvinyl chloride are often used for home sewage systems. Professional plumbers use DWV, a type of home plumbing piping used in your house’s drain, waste, and venting systems.

PVC plumbing pipes are suitable for applications with low pressure and low-temperature requirements. With this said, you should use these residential plumbing pipes for the toilet drain line and not for carrying hot water.

ABS Home Plumbing Pipes

Residential plumbing pipes that have a black appearance and are used in a sink, toilet drain, or tubs are generally made from ABS or Acrylonitrile Butadiene Styrene,

ABS home plumbing pipes are another type that you can find in DWV systems, and it functions similarly to PVC piping. Most of these residential plumbing pipes come in the exact sizes as PVC piping. However, ABS is not as popular as it is currently.

ABS home plumbing pipes are more durable than PVC but should not be exposed to direct sunlight.

Copper Home Plumbing Pipes

Copper home plumbing pipes have been used in residential plumbing systems for decades. So it is likely to find them around showers, sinks, tubs, and other plumbing fixtures in older and newer houses.

These residential plumbing pipes are the most popular type of water supply lines since copper does not affect drinking water quality.

The biggest drawback of copper home plumbing pipes is that the installation process requires a propane torch that is not DIY-friendly. If you do not apply enough heat to the joints, the solder will not flow into the joint, and you won’t have a proper seal. Moreover, too much heat can inhibit the appropriate sealing of the connection.

Galvanized Pipes for Residential Plumbing Systems

Galvanized pipes are not used in modern constructions and homes. However, it was once used for almost every residential property, so you can find them in older houses.

Galvanized home pipes were perfect when homes had lead pipes since they provided a lead-free alternative. If you have galvanized waste and drain lines, you will find fittings and replacement pipes such as galvanized tees and elbows.

Galvanized home plumbing pipes had a big issue; they tend to rust over time. If your residential plumbing system has galvanized water supply pipes, it would be best to replace them with PEX or Copper residential plumbing pipes to ensure you will have clean and clear drinking water.

If you are sure that you want to retrofit your galvanized piping, using PEX would be the best option since it is flexible, and you can install it inside the walls easily.

Everything You Need to Know About Industrial Plumbing Systems

There are various types of plumbing services in Canada that plumbing contractors provide for residential and commercial facilities. The primary ones are commercial plumbing, residential plumbing, and industrial plumbing systems. Each plumbing system requires unique services and knowledge to maintain and work efficiently. Additionally, every plumbing system is used for a particular purpose and application. This article primarily focuses on industrial plumbing systems, and by the end, you will learn everything you need to know about these plumbing systems.

What are Industrial Plumbing Systems?

Industrial plumbing systems are created to connect commercial buildings or other areas of a business with a water supply. Industrial plumbing services refer to installing, maintaining, and repairing these systems.

Industrial plumbing systems also refer to pipes and lines transporting wastewater away from an industrial facility.

Industrial and commercial plumbers in Canada are trained to install fixtures and plumbing equipment to distribute water and waste within the facility.

Industrial plumbers in Canada are responsible for installing equipment that is mainly used for different industries, including:

  • Food
  • Healthcare
  • Chemical Manufacturers

In industrial plumbing systems, water is filtered, heated, pumped, and travels through the piping lines to tap around the facility. Wastewater from an industrial building is treated before it is transported away from the facility.

The water and wastewater pipes in the industrial plumbing systems are made from metal or plastic such as PVC.

Industrial plumbing also involves pipes and lines that carry different gasses or steam for the cooling or heating system of the building. These gas pipes are also made from metal or PVC.

Professional industrial plumbers in Canada have the education, experience, and license to offer industrial plumbing services. However, you can quickly learn commercial plumbing basics if you want to become a plumber.

industrial plumbing services and systems

Standard and Common Types of Industrial Plumbing Services in Canada

The most common service for industrial plumbing systems is installing and repairing water pipes, gas lines, and vents. Industrial plumbing services also include using fittings to construct fixtures such as showers or sinks. These fixtures are not referred to as toilets since they belong to a different trade.

Industrial plumbers may sometimes have to install small appliances such as toasters and coffee makers in commercial spaces since these appliances require specialized piping for the operation, which belongs to the industrial plumbing systems. However, their primary duty is to install large equipment such as air handlers or compressors for heating systems of new buildings or business areas that already exist.

Professional and experienced industrial plumbers also work with pipe threading and cutting for large-scale applications. Pipe cutting is an industrial fabrication that involves shearing or sawing sections of metal or plastic pipes to adjust their length or diameter. Threading is a process that is done to adjust the size of the hole in the draining pipes.

Cost of Industrial Plumbing Applications in Canada

Plumbers in Canada charge per hour for their work, and the cost will vary depending on the type of plumbing service you require, your building’s location, and the time it takes them to complete the project. Additionally, their experience level will affect the cost.

For instance, it is expected that you will have to pay more for a complex project such as adding plumbing fixtures than you would for a simple application such as replacing water in your faucet. If you need cost estimation for your plumbing services in Canada, contact O Plus Plumbing.

Industrial Plumbing Systems vs. Commercial Plumbing

Industrial plumbing systems differ from commercial ones since they are constructed with different requirements and characteristics. For example, industrial plumbers install equipment that is mainly used in industries such as healthcare and chemical manufacturers, and the commercial plumbers are responsible for installing equipment such as toilets, sinks, faucets, and other commercial plumbing fixtures.

Industrial plumbing systems are generally more complex than commercial ones. The walls of the commercial piping lines are thinner depending on the material that is used, and they usually require additional insulation since most commercial facilities are indoors. Heat is available to keep water from freezing in cold winters in these facilities.

The pipework used in industrial plumbing systems accommodates and withstands high quantities of water and pressure due to its larger diameter. As told, commercial pipelines are thinner, and accessing them is easier compared to industrial plumbing systems.