Fix Your Leaky Toilets With These Easy Methods

fix leaky toilets

A leaky toilet can be an annoyance in any household, and it is important to fix the problem as soon as possible to prevent water wastage and further damage to your plumbing system. There are several ways to fix a leaky toilet, and in this article, we will discuss the best methods and tips to ensure a successful repair.

Identify the Source of Your Leaking Toilet

First and foremost, it is important to identify the source of the leak. The most common cause of a leaky toilet is a faulty flapper valve, which regulates water flow from the tank to the bowl. Over time, the flapper valve can become worn out, causing it not to create a proper seal and allowing water to leak into the bowl.

To fix this issue, the flapper valve should be replaced with a new one. A homeowner can do this simple and inexpensive repair with basic plumbing skills. You can purchase a new flapper valve at your local hardware store or online, and it should come with instructions on how to install it. Before starting the repair, make sure to turn off the water supply and flush your toilet to drain any water from the tank.

Check Your Toilet’s Fill Valve

A faulty fill valve can also cause leaky toilets. 

The fill valve is responsible for refilling the toilet tank after each flush, and if it is not functioning properly, it can cause the tank to fill with water, leading to a continuous leak. If you suspect the fill valve is the problem, it should be replaced with a new one.

Replacing the fill valve can be a bit more complicated than replacing the flapper valve, so it may be best to contact a professional plumber for this repair. Residential plumbers have the necessary skills and plumbing tools to quickly and efficiently replace the fill valve and ensure your toilet functions properly.

Fix the Loose Tank of Your Toilet

In addition to replacing faulty parts, there are other steps that can be taken to prevent a leaky toilet. One of the most important is to ensure that the toilet tank is properly secured to the bowl. If the tank is loose, it can cause water to leak around the base of your toilet. 

To fix this issue, tighten the bolts that secure the tank to the bowl, being careful not to overtighten and crack the porcelain.

fix leaking toilets

Wear and Tear Can Cause Leaky Toilets

Another way to prevent leaks is to regularly inspect the toilet for any signs of wear and tear. Check the flapper valve and fill valve for signs of damage or wear, and replace them if necessary. Look for cracks or other damage to the porcelain bowl or tank, which can also cause leaks. By catching these issues early, you can prevent more serious plumbing problems.

Be Careful With What You Flush

Finally, it is important to careful with what you flush down the toilet. Flushing items such as paper towels, feminine hygiene products, or other non-flushable items can cause clogs in your plumbing system, leading to leaks or other issues. Ensure that only toilet paper and human waste are flushed down the toilet, and dispose of other items in the trash.

Fix Your Leaking Toilet Now!

In conclusion, a leaky toilet can be a frustrating and wasteful problem, but it can be easily fixed with the right knowledge and tools. By identifying the source of the leak and replacing any faulty parts, securing the tank to the bowl, regularly inspecting the toilet for wear and tear, and being mindful of what you flush, you can prevent leaks and keep your plumbing system functioning properly.

 If you need help fixing a leaky toilet or if the problem persists, contact a residential plumber for assistance. They can quickly diagnose the issue and provide a professional repair to get your toilet back in working order.

Common Causes of Low Water Pressure in the Shower – How to Solve Them?

low water pressure in shower

Nobody wishes to shower with so much water pressure that it feels like a hydro-jetting session, but it also shouldn’t be so low that you question if any water is coming out. So, what is the source of low water pressure?

Low water pressure in the shower is one of many residential plumbing issues that may occur for various reasons, but determining the source of the problem can be difficult. If you have low water pressure in one section of your house or commercial facility, it is easy to determine the source of the problem.

If there is low water pressure throughout your home or building, it might be an indication of a larger plumbing problem.

Although you will learn how to solve low water pressure problems in your shower, it is better to contact a professional residential plumbing company or a plumber and let them fix your problem.

reasons for low water pressure

What Might Cause Low Water Pressure in the Shower and Generally?

While blockages or other drain obstructions are one of the most prevalent causes of low water pressure in the shower and the house, there are additional reasons why you may be experiencing low water pressure:

  • Municipal issues
  • Changing regulations
  • Shutoff valve problems
  • Defective pressure regulators
  • Old pipes
  • Water-saving devices
  • Water filters
  • Aerator buildup
  • Fixture problems
  • Leaky pipes

1. Municipal water problems

Your property or its pipes may not cause a problem with the water pressure; a municipal water supply issue might cause it. Whether you’re friends with your neighbors, ask if they’re having the same problem; if so, it’s a good likelihood this is the issue.

Solution

The solution is to contact your water supplier. Contacting them may alert them to the problem or reveal that they are already working to resolve it.

municipal water problems

2. Changing city regulations

Although you should have been informed, the city has likely modified its water pressure rules (if so, your water supplier’s options are limited).

Solution

The solution: You have two choices: cope with it or get a water booster system. It’s a good idea to have one of these installed by a plumber.

3. The house shutoff valve isn’t fully open

Have you recently had any plumbing work done in the house? Perhaps the home cutoff valve, or stop cock, was temporarily closed while work was being done and never fully reopened. The water shutdown valve must be completely open to ensure adequate water pressure.

This valve may be found outside or inside your home, where the main city water pipe enters your residence. The handle will resemble the one used to turn on the hose.

Learn about other plumbing water valves.

Solution

To ensure that the valve is fully open, turn it counterclockwise to the extent that it will go; if the handle resembles a lever, ensure that it is parallel to the pipe.

open shut off valve

4. Defective pressure regulator

The pressure regulator regulates the input pressure of your plumbing system to make it safe and prevent piping damage. A faulty regulator can cause both an increase and sudden low water pressure in the shower and all fixtures in your house or building.

Solution

The solution is to double-check the PSI (pounds per square inch) setting. The majority should be set to 50 PSI, but your water pressure will also seem low if yours is set lower. If the PSI is wrong, ask a plumber to get a replacement regulator.

5. Using old steel pipes might cause low water pressure in the shower

Repairing old galvanized pipes is a costly endeavor. Certain pipe materials corrode faster than others over time, resulting in mineral accumulation and low water pressure in the shower.

If you’re unsure how old your plumbing system is or what material your pipes are constructed of, you should have it inspected as soon as possible. Certain pipe materials are no longer in compliance with the construction rules and have become outdated.

Learn more about other types of plumbing pipes.

Solution

The solution: Hire a plumber to check your pipes and give advice on how to remedy the problem.

old plumbing pipes

6. Water-saving devices

While beneficial to the environment, water-saving equipment such as low-flow faucets and showerheads are detrimental to water pressure.

Solution

If you already have one and are experiencing low water pressure in the shower, you may need to replace it with a standard faucet or showerhead.

7. Poor or malfunctioning water filters and softeners

When not performing optimally, water filters can significantly reduce home water pressure. The same is true for water softeners used in many local houses due to hard water.

Solution

The fix: Replace the unit’s filter or softener (occasionally, the entire unit needs to be replaced, but you should generally start with a new filter or softener).

water filters for home

8. Aerator buildup

Low water pressure in the shower might be caused by mineral or rust accumulation in the aerator (which affects the amount of water coming from your faucet without affecting the pressure).

Solution

To fix low water pressure by buildup, remove the aerator and inspect it to determine if it needs to be cleaned. Scrub it well before replacing it to discover if it was the source of your problem.

aerator buildup

9. Faulty fixtures can cause low water pressure in the shower

It is not unusual for fittings to become blocked due to dirt or mineral accumulation. The solution is to remove the fixture and clean it.

Solution

Because fixtures are quite inexpensive, you may want just to replace them.

10. Leaky pipes can cause low water pressure in the shower

If none of these factors leads to low water pressure, it might be due to a simple leak. Water leaking from your pipes means less water reaches your showerhead or other home and building fittings.

Solution

The solution: Request an examination from your plumber to pinpoint the cause of the leaks. Or, you can fix it by using pipe leak tape.