Fix Your Leaky Toilets With These Easy Methods

fix leaky toilets

A leaky toilet can be an annoyance in any household, and it is important to fix the problem as soon as possible to prevent water wastage and further damage to your plumbing system. There are several ways to fix a leaky toilet, and in this article, we will discuss the best methods and tips to ensure a successful repair.

Identify the Source of Your Leaking Toilet

First and foremost, it is important to identify the source of the leak. The most common cause of a leaky toilet is a faulty flapper valve, which regulates water flow from the tank to the bowl. Over time, the flapper valve can become worn out, causing it not to create a proper seal and allowing water to leak into the bowl.

To fix this issue, the flapper valve should be replaced with a new one. A homeowner can do this simple and inexpensive repair with basic plumbing skills. You can purchase a new flapper valve at your local hardware store or online, and it should come with instructions on how to install it. Before starting the repair, make sure to turn off the water supply and flush your toilet to drain any water from the tank.

Check Your Toilet’s Fill Valve

A faulty fill valve can also cause leaky toilets. 

The fill valve is responsible for refilling the toilet tank after each flush, and if it is not functioning properly, it can cause the tank to fill with water, leading to a continuous leak. If you suspect the fill valve is the problem, it should be replaced with a new one.

Replacing the fill valve can be a bit more complicated than replacing the flapper valve, so it may be best to contact a professional plumber for this repair. Residential plumbers have the necessary skills and plumbing tools to quickly and efficiently replace the fill valve and ensure your toilet functions properly.

Fix the Loose Tank of Your Toilet

In addition to replacing faulty parts, there are other steps that can be taken to prevent a leaky toilet. One of the most important is to ensure that the toilet tank is properly secured to the bowl. If the tank is loose, it can cause water to leak around the base of your toilet. 

To fix this issue, tighten the bolts that secure the tank to the bowl, being careful not to overtighten and crack the porcelain.

fix leaking toilets

Wear and Tear Can Cause Leaky Toilets

Another way to prevent leaks is to regularly inspect the toilet for any signs of wear and tear. Check the flapper valve and fill valve for signs of damage or wear, and replace them if necessary. Look for cracks or other damage to the porcelain bowl or tank, which can also cause leaks. By catching these issues early, you can prevent more serious plumbing problems.

Be Careful With What You Flush

Finally, it is important to careful with what you flush down the toilet. Flushing items such as paper towels, feminine hygiene products, or other non-flushable items can cause clogs in your plumbing system, leading to leaks or other issues. Ensure that only toilet paper and human waste are flushed down the toilet, and dispose of other items in the trash.

Fix Your Leaking Toilet Now!

In conclusion, a leaky toilet can be a frustrating and wasteful problem, but it can be easily fixed with the right knowledge and tools. By identifying the source of the leak and replacing any faulty parts, securing the tank to the bowl, regularly inspecting the toilet for wear and tear, and being mindful of what you flush, you can prevent leaks and keep your plumbing system functioning properly.

 If you need help fixing a leaky toilet or if the problem persists, contact a residential plumber for assistance. They can quickly diagnose the issue and provide a professional repair to get your toilet back in working order.

5 Easiest Ways to Unclog Bathroom Sinks

Many people rely on chemical solutions to unclog bathroom sinks as a quick fix, but many more practical and non-corrosive ways solve the problem.

If the water in your sink does not drain after a minute or two, you most likely have a slow-running drain. Slow running or clogged bathroom sink drains are a common household problem regularly caused by hair clumps or residue from hygiene products that have built up and eventually caused a blockage. Many people rely on chemical solutions to unclog bathroom sinks as a quick fix, but many more practical and non-corrosive ways solve the problem.

Also, many people avoid dealing with a clogged drain and don’t unclog bathroom sinks in their homes. But if left unnoticed, the problem can amplify to an entirely blocked pipe that is much harder to deal with. It doesn’t have to be challenging to figure out how to unclog bathroom sinks and if your bathroom sink is clogged and you’re ready to find a solution, follow the steps below.

Using boiling water to unclog bathroom sinks

Before explaining the benefits of boiling water to unclog bathroom sinks, you must know that if the residential plumbing drainpipes in your bathroom are made from PVC, this method is not recommended due to the chance of melting your pipes.

Using boiling water can be an excellent remedy to unclog bathroom sinks if the blockage is caused by residuals, built-up chemicals, and soap scum. Fill up a pot or a kettle with water and bring it to a boil. When your water is ready, pour it directly down the drain in 4 to 6 increments of approximately half a cup and wait for it to unclog bathroom sinks.

It is important to note that your drain must be empty when pouring the water in, make sure to do this at least 15 to 20 minutes after the last time you used the sink’s faucet. If the reasons for the blockage were chemical residuals or soap scum, this method would easily unblock bathroom sinks.

Using vinegar and baking soda to unclog bathroom drains

Another easy DIY method that almost anyone can do instantly to unclog bathroom sinks is to use baking soda and vinegar. When vinegar and baking soda are combined, they have a chemical reaction that produces a lot of bubbling and fizzing that removes all stubborn stains and gunk that may be stuck in the drain, clearing bathroom sinks.

To unclog bathroom sinks with this method, you will need approximately 1/3 to 1/4 of a cup of both ingredients. Pour your baking soda down the gutter, then follow it with the vinegar; leave the mixture in the drain for approximately 24 hours to see the full effect.

We must say that it’s pretty important to not mix your baking soda with the vinegar outside the drain because you want the reaction to occur where the clogging is, and doing it outside of the drain and then pouring it in is very counterintuitive and might not unclog bathroom sinks.

Using a plunger

One of the easiest DIY methods to unclog bathroom sinks is using a plunger. Plungers are helpful for almost any type of clogging if you catch the problem at its early stages and do not let it grow into a total blockage, but it is vital to use the correct type of plunger. Standard toilet plungers have a flange at the end that restricts your plunging abilities when it comes to unclogging bathroom sinks. To unclog bathroom sinks, you must use a cup plunger.

To use this method to unclog bathroom sinks, first, you need to remove the drain stopper. This step is crucial because if you don’t remove the drain stopper, you will only be closing and opening the stopper instead of plunging your pipes. The second step is to center the plunger over your drain and place it on it to create a perfect seal, then move it up and down with a little force.

But beware that the gunk and trash stuck in your drain may come up to the sink with plunging, so be prepared to clean them out and not let them go back in the drain.

Unclog bathroom sinks with a wet-dry vacuum

Sometimes when dealing with a commercial plumbing blockage, the drains don’t clear by using boiling water, baking soda or a plunger. In that case, using a dry-wet vacuum can be a powerful way to unclog bathroom sinks, sucking everything loosened up or softened by the other methods and bringing them to the surface.

The first step to unclog bathroom sinks with a vacuum is to put your vacuum to the highest setting and cover the end of the hose with a towel to prevent any clumps from getting into your vacuum. Place the cloth-covered hose directly on top of your drain and seal the drain. Open your faucet and raise the water just over the towel to make an even better vacuum. Lastly, turn on the wet and dry vacuum, keep it on top of the drain, and watch it take care of business.

If you do this correctly, hopefully, you will hear your vacuum unclog bathroom sinks and bring gunk and hard minerals up in no time.


Using a drain snake or a wire

If none of the other methods worked to unclog bathroom sinks and send the residuals out of your pipes and into industrial plumbing systems, this one will surely do the trick. This method is saved for last because it’s the most involved and labor-intensive.

Drain snakes are coiled metal wires that have a broader tip to efficiently and effectively collect hair or destroy obstacles in their way. You can buy these coils at any hardware store and use them to unclog bathroom sinks. But if you don’t want to invest in a complete drain snake kit, you can use a hanging wire, straighten it and bend the end to shape it like a hook. Stick it down the drain and pull all the hair out. A drain snake does the same but is more advanced.


Best Water-Efficient Faucets for Home Plumbing System – 3 Types You Should Know

water-efficient faucets

Are you looking to upgrade your residential plumbing system to a more environmentally friendly home? Water-efficient faucets for home plumbing systems can help you decrease wasted water amount and save money.

The average Canadian family of four generally uses about 300 gallons of water daily. So, you can install water-efficient faucets and save 20% on your water usage, which equates to about $200 saving annually.

There are various water-saving faucets available that you can choose and buy for your home. So, it could be a challenging task for you to do without any background. This complete guide to water-efficient faucets will help you choose the best product for your home. We also recommend you know the best residential plumbing fixtures before going further to understand better what you will use for your bathrooms and kitchen.

touchless water-efficient faucets

What are Water-Efficient Faucets?

According to regulations and codes, the standard flow rate of a faucet for a home plumbing system is 2.2 GPM. A tap that can deliver a 30% lower flow rate is considered a water-efficient product.

With this said, water-saving faucets for home plumbing systems have a flow rate of 1.5 GPM. If everyone improves their home plumbing with efficient products, it will save billions of gallons of water annually. So, it is better to benefit from professional plumbing services and use efficient fixtures or faucets.

Top Water-Saving Faucets

So now you want to upgrade your home’s faucets to ones that conserve water. There is a list of water-efficient faucets that we have provided for you, and you can use any of these for your home.

Touchless Water-Efficient Faucets

Touchless water-efficient faucets have sensors that you can use to turn the water on and off. These plumbing fixtures allow the user to use only the amount of water needed.

You can turn the water faucet on and off by waving your hand over the sensor. This makes it easier to turn the water off while lathering your hands up to help economize water usage.

Additionally, you will not have to touch the faucet with wet and soapy hands. Additionally, modern water-saving waters with touchless technology allow users to control their water usage for daily use.

Metering Faucets

The metering faucets that are used for commercial plumbing and residential plumbing fixtures allow you to set a predetermined amount of water flow whenever you turn the water on.

These modern water-efficient faucets can reduce the water usage of a building by more than 30% annually per faucet. You adjust and control the water flow rate from 0.5 to 2.2 GPM with metering faucets.

Water-Saving Faucets With Low-Flow Aerators

Low-flow or tap aerator is an essential residential plumbing accessory installed at the mouth of the faucet. The primary function of these plumbing products is to reduce the amount of water flow.

Low-flow water-saving faucets save water while offering standard water pressure and easy installation.

After installing low-flow aerators, you will slow the water rate up to 1.5 GPM. You can pair these products with other water-efficient faucets and make your saving continue to increase.

water-saving faucets

Advantages of Water-Efficient Faucets for Residential Plumbing Systems

As evident from the name, water-efficient bathroom and kitchen faucets are mainly used for reducing water usage each time you turn on and off the sink.

Water-Efficient Faucets are Environmentally Friendly

According to scientific statistics, every industrial city in the world will experience a water shortage in the next ten years. So, when homeowners install water-efficient faucets, they combat the effects of global warming.

Water-Saving Fixtures are Cost-Effective

You can reduce your water bill by using water-saving faucets. Additionally, you can turn a commercial building into an eco-friendly building with these simple plumbing fixtures.

Increase Your Property Value with Water-Efficient Faucets and Fixtures

Any upgrades in your home that will improve its efficiency will increase its value. So, if you decrease the amount of wastewater by installing water-saving faucets, you will add value to your home.

Hire a Residential Plumber to Help You Choose and Install Your Faucets

Although installing and using water-saving faucets is not so complicated, it is better to let the professionals handle the job. Additionally, when you contact professional plumbing contractors, in addition to helping you choose water-efficient faucets and installing them, they will also inspect for other residential plumbing issues and solve them to make your plumbing system run smoothly and efficiently.

Commercial Plumbing Systems vs. Residential Plumbing: 11 Differences

commercial plumbing systems

A building is a living thing, and its life depends on various factors. One of the essential factors is its plumbing system. Many people think that commercial plumbing systems are the same as residential plumbing. However, there is a significant difference between these two. As a homeowner or business owner, you should know the differences to find a reliable plumbing professional or contractor to do the job for you. But first, you should know what these plumbing systems or services are.

What is a Residential Plumbing System or Services?

A residential plumbing system is a complicated network in a home that comprises cold and hot water supply pipes, appliances, home plumbing fixtures, drain pipes, vent pipes, water storage tanks, water heat, traps, etc. Generally, the piping runs either concealed inside the walls or on the outer area of the walls.

Essential Parts of Residential Plumbing Systems

Contractors’ residential plumbing services are repairing or installing the three essential components in the above list. So, if you want to ensure that your plumbing systems run efficiently, you should find a reliable contractor to do the job for you.

commercial plumbing pipe lines - O Plus Plumbing Inc. | Leading Plumbing, Plumber & Drain Company in The Greater Toronto Area - Professional Plumbing & Drain In Toronto and GTA

What are Commercial Plumbing Systems or Services?

Commercial plumbing contractors are companies that offer industrial plumbers who work with water supply systems and wastewater drainage systems for public spaces, businesses, complex buildings, and high rises.

Since commercial plumbing systems are more challenging and complex than residential plumbing, it has higher demands in the industry. Reliable commercial or industrial plumbers are responsible for the regular repair and maintenance of all such systems. However, their work scope is almost limitless, depending on their plumbing skills.

Experts in Commercial Plumbing System

As told, commercial plumbing systems and services are complicated and require experience and skill. So, professional plumbers obtain special training for particular facets of plumbing, including:

  • Potable plumbers: These experts work with commercial plumbing systems that involve drinking water.
  • Steamfitters and pipefitters: These commercial plumbers work primarily on cooling, heating, and even electricity generators in industrial environments.
  • Pipelayers: Commercial plumbing system experts generally deal with laying pipework for wastewater drainage.
  • Sewage Systems Plumbers: These commercial plumbers are specialists in commercial facilities sewages.
  • Fuel Gas Plumbers: These industrial plumbers work with tanks and pipelines that contain gas.

Differences Between Commercial Plumbing Systems and Residential Plumbing

Now that you know what commercial and residential plumbing systems are, it is time to understand the main differences between these two, which are:

1: Daily Usage of Residential and Commercial Plumbing Systems

The daily usage of commercial plumbing systems is greater than the residential systems due to frequent use by employees and clients during the day.

However, family members only use a residential plumbing system, so it requires fewer outlets and pipe fitting.

2: Size and Durability

Since commercial plumbing has more usage, it requires large fixtures that have higher grades and more extended durability. Using larger fixtures and long-lasting materials will reduce the breaking down due to pressure or strain.

The fixtures are smaller in the home plumbing systems, and lower-grade pipes are used since they do not undergo as frequent use as commercial facilities.

3: Complexity Difference Between Commercial Plumbing Systems and Residential Ones

Most commercial buildings have multiple floors, toilets, and sinks, while most homes usually have simple and easy navigation through their structure. This means that commercial plumbers understand complex building structures.

4: Efficiency Difference

No plumbing system is perfect, and damages are always expected at any point. A clogged sink or bathroom in commercial facilities may pose a difficulty to many people, and fixing them should be done quickly. So, it is recommended to hire professional plumbers who are experienced in dealing with these complex systems.

commercial plumbing

5: Probability of Damage in Commercial and Home Plumbing Systems

The complex commercial plumbing systems are more prone to damage than residential ones. The damage to home plumbing is limited since it features a minor size system. On the other hand, even slight damage to commercial plumbing can be disastrous.

6: Water Heater In Residential and Commercial Plumbing Systems

Using larger storage tanks and gas levels is required for commercial facilities since industrial buildings have more people who need more hot water than homes.

7: Health Issues with Plumbing Systems

Since more people visit commercial buildings such as restaurants, there is a need to follow strict health care regulations and ensure good hygiene in the plumbing system.

It is easier to manage residential plumbing systems and doesn’t require different sets of plumbing fixtures like commercial plumbing systems.

8: Work Scope

The work on commercial plumbing systems is more repetitive than on home systems. Residential facilities require plumbing services in particular areas, which involves a standard working hour. However, commercial plumbing services take place at any time of the day.

9: Knowledge Prerequisites for Commercial and Home Plumbing Services

Commercial plumbing services need to be more scheduled-oriented. For example, repairing services in a building needs to be done within the time frame as more people depend on it. So, delays in the work can lead to losses. However, the time is not a problem in residential facilities as long as it doesn’t matter to the homeowners.

10: Drainage Systems and Services

Draining commercial plumbing systems is more complex than residential facilities. Additionally, commercial issues are easier to solve in the home plumbing systems.

11: Dripping and Running Water In Commercial and Residential Systems

Determining small water leakages in residential facilities and homes is much easier than commercial buildings. Since commercial buildings have multiple floors, water leakages are easily missed, which will lead to severe damage and large bills.